A metric socket set is the set of sockets sized in millimetres — the system almost every modern car, van and machine is built around. If you work on modern vehicles, a metric socket set is the set you reach for first. In this guide we explain what a metric socket set is, what to look for, and which set suits your work — with links to our wider socket set and metric impact socket set guides.
What is a metric socket set?
A metric socket set is a set of sockets with metric sizes — 8 mm, 10 mm, 13 mm, 17 mm and so on — on 1/4 in, 3/8 in or 1/2 in drives. The sockets are usually made from chrome vanadium steel with a polished chrome finish, and they come in standard and deep depths. Metric is the system used on almost every modern car, van and machine sold outside North America, so a metric socket set is the set that fits the fasteners you actually meet. If you own a car built in the last 30 years, metric is the system you need.
What to look for in a metric socket set
Not all metric socket sets are equal. Check these points before you buy:
- Drive size: 3/8 in is the most useful all-round drive for a metric socket set; 1/2 in suits wheel nuts and heavy work, and 1/4 in suits small fasteners. See our socket wrench set 1/2 guide for the 1/2 in drive.
- Size range: a useful metric socket set runs from 8 mm to 32 mm, with the 10 mm, 13 mm, 17 mm and 19 mm sizes the ones you will use most. The 10 mm socket is famously the one that goes missing first — buy a set with a spare.
- 6-point sockets: 6-point sockets grip the flats of a nut and are far less likely to round it. For a metric socket set, 6-point is the right choice — see our 6 point socket set guide for why.
- Deep vs standard: deep sockets reach nuts on long studs; standard-depth sockets are more compact. A good metric socket set includes both in the common sizes.
- Steel and finish: chrome vanadium (Cr-V) is the standard for hand sockets. A polished chrome finish resists rust; look for clear size markings that will not wear off.
- Case: a sturdy case that holds each socket in size order. Metric sockets look alike at a glance, so clear size order matters.
Metric vs SAE socket sets
Metric sockets are sized in millimetres and fit the fasteners on almost every modern car, van and machine. SAE sockets are sized in fractions of an inch and fit older American vehicles and some imported machinery. The two systems are close but not interchangeable — a 13 mm socket is not the same as a 1/2 in socket, and using the wrong one rounds fasteners. If you work on modern vehicles, buy metric first and add SAE only if you need it. Most mechanic tool sets are metric for exactly this reason.
Who is a metric socket set for?
Home mechanics are the obvious audience — anyone who services a modern car needs metric sockets. They are also the standard set for tyre fitters, mobile mechanics and garage technicians. If you work on older American machinery, you will need SAE as well, but for almost everyone else, metric is the system to buy. A metric socket set is the first socket set most people should own.
Common mistakes to avoid
- Mixing metric and SAE: a 13 mm socket is close to a 1/2 in socket but not the same, and the wrong one rounds fasteners.
- Choosing 12-point sockets for tight fasteners: they round nuts under torque. Use 6-point.
- Buying on piece count alone: a metric socket set padded with bits and adapters is worse than a smaller set with full socket coverage.
- Using chrome sockets on an impact wrench: they can shatter. Use impact-rated sockets only — see our metric impact socket set guide.
Frequently asked questions
What is the difference between a metric and an SAE socket set?
Metric sockets are sized in millimetres (10 mm, 13 mm, 17 mm) and fit modern vehicles. SAE sockets are sized in fractions of an inch (3/8 in, 1/2 in, 3/4 in) and fit older American machinery. The two are not interchangeable.
What size metric socket set do I need?
For home use, a 3/8 in drive metric socket set of 40–60 pieces covers most jobs. For a busy garage, a 1/2 in drive set of 100+ pieces covers wheel nuts, suspension and engine work. If you are unsure, see our guide on how to choose a socket set.
Are metric sockets the same as standard sockets?
No — ‘standard’ usually means SAE (imperial) sockets sized in fractions of an inch, while metric sockets are sized in millimetres. The two systems are not interchangeable, so check which your fasteners need before you buy.
Related guides
Keep building your kit with our related guides: the best socket set for hand use, the best metric impact socket set for impact work, the best 6 point socket set for grip, and our tool sets hub for the wider range.
[…] set is, what to look for, and which set suits your work — with links to our wider wrench set and metric socket set […]